The daily maintenance of zinc oxide rotary kiln is very important. Good maintenance can make the production efficiency of rotary kiln more efficient, and prolong the service life of rotary kiln, while improving production quality and saving economic cost. Lubrication and cooling in maintenance are the most important. Let me introduce you to several common knowledge about lubrication and cooling of zinc oxide rotary kiln.

    First, for lubrication, we must first ensure that the amount of oil is sufficient. In the operation of the zinc oxide rotary kiln, it is necessary to check the oil level in time. If the oil level is lower than the lower limit, it should be replenished in time. Secondly, the lubricating oil of the rotary kiln cannot be abused The cycle of replacing new oil should also be reasonable. In the production of zinc oxide rotary kiln, the wear and oil demand of gears and bearings are relatively stable, which determines that the amount of oil used is relatively stable. Therefore, it is necessary to reasonably grasp the oil change date of the rotary kiln.

    Second, strengthen the testing of the internal water circulation system. The water circulation system of the zinc oxide rotary kiln generally has a water flow indicator, which can judge the water circulation activity according to the water flow indicator. When the kiln is stopped, if the kiln is stopped for a long time or the weather is cold, the circulating water in the kiln is completely discharged to prevent the water from freezing and causing the kiln body to deform. If the circulating water cannot be completely discharged when the water is discharged, it is necessary to open three. The air hole of the venting valve uses the principle of siphon and air contraction to discharge water.

    3. If oil leakage is found in the usual inspection, whether it is serious or not, it must be dealt with in time to prevent problems before they occur, so as to avoid further production problems caused by oil leakage.